On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm

Elastic rubber band for fixing the emergency regulator to the neck. Easy to locate and can even keep the second stage fixed to the mouth in an emergency situation.

Low pressure hose for regulator with braid outer coating. Color black. Length 210 cm.

Low pressure hose for regulator with braided outer coating. Color black. Length 100 cm.

LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.

Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF

LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.

LP hose with racord to connect on the low pressure inflator BPI of a wing or jacket. Length 51 cm.

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.

High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.

High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.

HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.

Plastic hook to place at the end of a 5 mm rubber band. It is very useful in accessories like wetnotes, pencils, computers ... etc to keep seuros, but also operational without his ring drop.

Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too!

The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose.

As the popularity of sidemount diving continues to grow around the world, Apeks delivers a regulator kit that contains all of the necessary hardware and accessories to complete your breathing set-up, including two award-winning XTX50 regulators.

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 - 18 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

Faber 12 liters container in long format and white color. CE approved and compliance with EN250 standard. The thread is M25x2 with standard EN144 rule. Work pressure of 232 bar. Not include valve.